Recommended Operating Conditions
Type: FC Series Filter Cart
Viscosity Range *1: Up to 220 cSt (1000 SSU)
Flow Rate: 10 gpm (37.5 lpm)
Temperature Range *2: 32ºF to 150ºF (0ºC to 65ºC)
Pump Bypass: 87 psid (6 bar)
Filtration Unit Specifications
Type: Dual (inline) Behringer spin-on
Filter Heads: Cast aluminum
Gauges: Tri-color pressure gauges
Filter Bypass: 25 psid (1.7 bar)
Filter Elements: High-efficiency absolute rated or
water removal spin-on style elements
Filtration Ratings 1, 3, 6, 12, 25 µm Bx = 200 (Bx[c] = 1000)
10 µm nominal + water-removal
Materials of Construction
Cart: Powder coated welded steel frame
Wands: 32” long electro-zinc plated steel
Hoses: Clear flexible kink-resistant suction hoses
Wheels: Solid rubber with greasable bearings
Electric Motor Specifications
Motor Voltage: 115/230V single phase, 8.4/4.2 amps, 60Hz
50Hz Option: 115/230V single phase, 8.4/4.2 amps, 50Hz
Unit Weight
Approx. Weight: 140 lbs (63.5 kgs)
*1 Viscosity range is recommended based on the suction hoses and pump capacity.As fluids heat or cool, their viscosity will change. Please ensure that the fluid viscosity is in the working range of the unit. Fluid must be checked to determine that viscosity is not to exceed 220 cSt. For fluids with higher viscosity, please consult Behringer for application assistance.
*2 Max operating temperature is dependant upon the standard nitrile (Buna) seals. Other seal materials are available for different operating temperatures and fluid types. Please consult Behringer for proper application of seal materials. Please also note that temperature will affect the viscosity of the fluid.
|
Sizing and Duration |
Filtration Information |
|
In order to properly condition fluid in your reservoir, we recommend turning the reservoir over approx. 7 times to ensure that all the fluid has been passed through the filter once. To achieve this, you can use 1 the following formula to determine how long to run the filter cart.
|
Reservoir Size x 7 |
= Service Time (Minutes) |
|
Flow Rate (10 GPM) |
For a 100 gallon reservoir, the formula would be:
|
100 gallons x 7 |
= 70 Minutes |
|
10 GPM |
Using this formula achieves single-pass filtration. If you want to condition fluid further, you can multiply the service time by the number of passes you would like to achieve. For example, for 2-pass filtration you would multiply 70 minutes x 2 and that yields a 140
minute run-time for 2-pass filtration on a 100 gallon reservoir.
Notes:
1. 7- time reservoir turnover is as recommended by Noria Corporation
|
|
Filter Element |
Filtration Rating |
Dirt Holding Capacity |
|
BSO128S01A38 |
B1=200 (B2.5[c]=1000) |
52 grams |
|
BSO128S03A38 |
B3=200 (B5[c]=1000) |
54 grams |
|
BSO128S06A38 |
B6=200 (B7[c]=1000) |
58 grams |
|
BSO128S12A38 |
B12=200 (B12[c]=1000) |
64 grams |
|
BSO128S25A38 |
B25=200 (B22[c]=1000) |
126 grams |
|
BSO128S10NH38 |
10 micron nominal & water removal |
31 grams
358ml water removal
|
|
BSO128E01A38 |
B1=200 (B2.5[c]=1000) |
90 grams |
|
BSO128E03A38 |
B3=200 (B5[c]=1000) |
96 grams |
|
BSO128E06A38 |
B6=200 (B7[c]=1000) |
107 grams |
|
BSO128E12A38 |
B12=200 (B12[c]=1000) |
119 grams |
|
BSO128E25A38 |
B25=200 (B22[c]=1000) |
235 grams |
|
BSO128E10NH38 |
10 micron nominal
&Water removal
10 micron nominal & Water removal
|
56 grams
663ml water removal
|
|
|
|
|
Ordering Information |
|
The information contained in this document is provided as an aid in properly selecting products and/or options. It is intended to be used by technically experienced users for general reference only. The supplier assumes no responsibility or liability for the accuracy or completeness of this document, as well as results obtained by the use of this information. Due to the variety of possible operating conditions, it is highly recommended that the user make their own tests to determine the safety and suitability of all products and combinations thereof. The user is solely responsible for final determination of such conditions.
|
|
