Cushioned Clamping System

Behringer

973-948-0226

Item Information:

Behringer now offers a complete line of cushioned clamps.Cushioned clamps are typically used in pneumatic refrigeration, HVAC, and some low pressure hydraulic lines. Berhinger’s cushioned clamps also eliminate metal to metal contact between the fluid lines and the support hardware. Standard material for the hardware is a clear trivalent zinc-plated steel, with options for both 304 and 316 grades stainless steel. Additional special options include aluminum and powder coating.


Hardware:

   
         Zinc-Plated Carbon Steel (standard)
         AISI 304 (A2 - 1.1.4301 / 1.4305)
         AISI 316 (A2 - 1.1.4401 / 1.4571)
Cushion:    
         Thermoplastic Elastomer
         -65°F to 275°F operating temperature
Required Channel:    
         Fits industry standard strut channel with 1 - 5/8 in. Width.
Ordering
  Order Number   Material
CC ____________ - __________
 
Hardware Material
Z Electro-Zinc Dichromate Plating
T AISI 304 Stainless Steel (A2 - 1.4301/1.4305)
X AISI 316/316Ti Stainless Steel (A4 - 1.4401/1.4571)

To order, use the ordering code above. Fill in the order number from the light blue shaded boxes in the chart to the right. Then add the material designation from the Hardware Materials chart above.

Ex. For 1 in. Pipe with zinc-plated hardware, you would order CC1315-Z.

Clamp Pair Selection and Part Numbers
Size Order
Number
OD A B C D* Box
Quantity
1/4 T 0250 0.250 1.110 0.220 0.075 0.620 24
3/8 T 0375 0.375 1.240 0.280 0.075 0.750 24
1/2 T 0500 0.500 1.360 0.340 0.075 0.870 24
1/4 P 0540 0.540 1.410 0.630 0.075 0.910 24
5/8 T 0625 0.625 1.500 0.410 0.075 1.000 24
3/8 P 0675 0.675 1.590 0.450 0.075 1.070 24
3/4 T 0750 0.750 1.780 0.530 0.075 1.330 24
1/2 P 0840 0.840 1.910 0.590 0.075 1.450 24
7/8 T 0875 0.875 1.910 0.580 0.075 1.450 24
1 T 1000 1.000 2.030 0.660 0.105 1.660 12
3/4 P 1050 1.050 2.160 0.720 0.105 1.790 12
1 1/8 T 1125 1.125 2.160 0.720 0.105 1.790 12
1 1/4 T 1250 1.250 2.300 0.780 0.105 1.920 12
1 P 1315 1.315 2.750 0.910 0.119 2.220 12
1 3/8 T 1375 1.375 2.750 0.910 0.119 2.220 12
1 1/2 T 1500 1.500 2.750 0.910 0.119 2.220 12
1 5/8 T 1625 1.625 3.030 1.030 0.119 2.470 12
1 1/4 P 1660 1.660 3.030 1.030 0.119 2.470 12
1 3/4 T 1750 1.750 3.030 1.030 0.119 2.470 12
1 7/8 T 1875 1.875 3.280 1.160 0.119 2.470 12
1 1/2 P 1900 1.900 3.280 1.160 0.119 2.470 12
2 T 2000 2.000 3.280 1.160 0.119 2.470 12
1 1/8 T 2125 2.125 3.530 1.280 0.119 2.970 1
2 1/4 T 2250 2.250 3.780 1.410 0.119 3.220 1
2 3/8T 2375 2.375 3.780 1.410 0.119 3.220 1
2 P 2375 2.375 3.780 1.410 0.119 3.220 1
2 1/2 T 2500 2.500 4.030 1.530 0.119 3.470 1
2 5/8 T 2625 2.625 4.030 1.530 0.119 3.470 1
2 1/2 P 2875 2.875 4.270 1.660 0.119 3.720 1
3 T 3000 3.000 4.520 1.780 0.119 3.970 1
3 1/8 T 3125 3.125 4.520 1.780 0.119 3.970 1
3 P 3500 3.500 4.910 1.970 0.119 4.360 1
3 5/8 T 3625 3.625 5.030 2.030 0.119 4.470 1
3 1/2 P 4000 4.000 5.530 2.280 0.119 4.970 1
4 1/8 T 4125 4.125 5.660 2.340 0.119 5.090 1
4 P 4500 4.500 6.030 2.530 0.119 5.470 1
5 P 5563 5.563 7.030 3.030 0.119 6.470 1
6 P 6625 6.625 8.030 3.530 0.119 7.470 1