Products - Heavy Series
View 3D / CAD Information for Heavy Series Pipe Clamps
Please make a selection:
Heavy Series Clamp Pair Selection
Manufacturer: Behringer
Behringer’s clamp pairs are available in different materials and incorporate a modular insert by group size. Heavy series pipe clamps are available in sizes from 1/4 in. (6.35 mm) through 8.625 in. (219 mm) OD Sizes.
Heavy Series Single Weld Plate (SWP)
Manufacturer: Behringer
The typical mounting configuration is where the clamp is welded to the support structure.
Heavy Series Single Cover Plate (SCP)
Manufacturer: Behringer
The cover plate is the standard top fixture for securing the clamp with hexagon head bolts.
Heavy Series Double Weld Plate (DWP)
Manufacturer: Behringer
Double weld plates are used to make a double heavy clamp, with both sets of clamp halves in line with the piping. This design can accommodate double the operating pressure as the single heavy pipe clamps.
Heavy Series Double Cover Plate (DCP)
Manufacturer: Behringer
Double cover plates are used to make a double heavy clamp, with both sets of clamp halves in line with the piping. This design can accommodate double the operating pressure of the single heavy clamps.
Heavy Series Hexagon Head Bolt (HEX)
Manufacturer: Behringer
The Hexagon head bolt is used when using clamps with coverplates.
Heavy Series Stacking Bolt (STB)
Manufacturer: Behringer
The stacking bolt is used when another clamp module will be stacked on top of the bottom or existing module. The head of the stacking bolt has a female thread for the next bolt to engage with.
Heavy Series Strut Clip Nut (UCN)
Manufacturer: Behringer
The UCN nut is used to adapt Behringer’s pipe clamps to standard strut channel. This allows for even greater flexibility and mounting possibilities.
Heavy Series Safety Plate (SAF)
Manufacturer: Behringer
The Safety plate is used in conjunction with the STB stacking bolts above. This ensures that the stacking bolts will remain locked inplace when tightening the clamp module stacked above.
Heavy Series Rail Nut (RCN)
Manufacturer: Behringer
The rail nuts allow mounting of the heavy series clamps to the RAL-4 Heavy series rail.
Heavy Series Mounting Rail (RAL-4)
Manufacturer: Behringer
Behringer’s Heavy series RAL-4 is used to mount clamps with heavy rail nuts. This allows clamps from multiple groups to be mounted to the same rail. The RAL-4 conforms to the DIN 3015-2 specification.
Heavy Series Mounting Rail (RAL-2)
Manufacturer: Behringer
Behringer’s proprietary Heavy series RAL-2 is used to mount clamps with Weld Plates (SWP). The weld plate slides into the rail, eliminating the need for rail nuts. The RAL-2 fits Groups H3-H5 weld plates.
Heavy Series Mounting Rail (RAL-3)
Manufacturer: Behringer
Behringer’s proprietary Heavy series RAL-3 is used to mount clamps with Weld Plates (SWP). The weld plate slides into the rail, eliminating the need for rail nuts. The RAL-2 fits Group H6 weld plates only.
