Products - Twin Series

Please make a selection:
Twin Series Clamp Pair Selection

Twin Series Clamp Pair Selection

Manufacturer: Behringer
Behringer’s clamp pairs are available in different materials and incorporate a modular insert by group size. Twin series pipe clamps are available in sizes from 1/4 in. (6.35 mm) through 1.66in. (42 mm) OD Sizes.


Twin Series Weld Plate (TWP)

Twin Series Weld Plate (TWP)

Manufacturer: Behringer
The typical mounting configuration where the clamp is welded to the support structure.


Twin Series Cover Plate (TCP)

Twin Series Cover Plate (TCP)

Manufacturer: Behringer
The cover plate is the typical top fixture used to secure twin series pipe clamps.


Twin Series Hex Bolts (HEX)

Twin Series Hex Bolts (HEX)

Manufacturer: Behringer
The Hexagon head bolts are used with clamps with cover plates.


Twin Series Stacking Bolt (STB)

Twin Series Stacking Bolt (STB)

Manufacturer: Behringer
The stacking bolt is used when another clamp module will be stacked on top of the existing bottom clamp. The head of the stacking bolt has a female thread for the next bolt on top to engage.


Twin Series Rail Nut (RCN-0)

Twin Series Rail Nut (RCN-0)

Manufacturer: Behringer
The RCN-0 is for use when mounting Behringer’s RAL-0, and competitor’s standard rails.


Twin Series Rail Nut (RCN-1/RCN-4)

Twin Series Rail Nut (RCN-1/RCN-4)

Manufacturer: Behringer
The RCN-1 and RCN-4 are used only when mounting to Behringer’s proprietary RAL-1.


Twin Series Mounting Rail (RAL-0)

Twin Series Mounting Rail (RAL-0)

Manufacturer: Behringer
Behringer’s RAL-0 can be used to mount clamps with RCN-0 rail nuts only.


Twin Series Mounting Rail (RAL-1)

Twin Series Mounting Rail (RAL-1)

Manufacturer: Behringer
Behringer’s Proprietary RAL-1 can be used to mount both clamps with RCN-1 and RCN-4 rail nuts above as well as the TWP weld plates.


Twin Series Safety Plate (SAF)

Twin Series Safety Plate (SAF)

Manufacturer: Behringer
The safety plate is used in conjunction with the STB stacking bolts. This ensures that the stacking bolts will remain locked in place when tightening the clamp module stacked above it.


Twin Series Unistrut Clip Nut (UCN)

Twin Series Unistrut Clip Nut (UCN)

Manufacturer: Behringer
The UCN nut is used to adapt Behringer’s pipe clamps to standard strut. This allows for even greater flexibility and mounting possibilities.