View 3D / CAD Information for Standard Series Pipe Clamps
Please make a selection:
Manufacturer: Behringer
Behringer’s clamp pairs are available in different materials and incorporate a modular insert by group size. Standard series pipe clamps are available in sizes from 1/4 in. (6.35mm) through 4-1/4 in. (114.3mm) OD Sizes.
Manufacturer: Behringer
The typical mounting configuration is one where the clamp is welded to the support structure. Weld plates can also be used in the RAL-1 mounting rail as an alternative to using the RCN-1 rail nuts.
Manufacturer: Behringer
The versatile base plate can be either welded or bolted to the structure. This is typically used where welding is not an option such as on drywall or wood support structures.
Manufacturer: Behringer
Double weld plates allow for runs of two lines side by side, while keeping center distances aligned and reducing installation time required.
Manufacturer: Behringer
Group weld plates allow for runs of multiple lines side by side, while keeping regimented center distances and reducing installation time required. GRWs can run from 3 to 27 positions, depending on the group size, and are typically unplated.
Manufacturer: Behringer
The RCN-0 is for use when mounting to Behringer's RAL-0, and competitior's DIN standard rails. The MRN is the same rail nut, but with metric thread.
Manufacturer: Behringer
The RCN-1 is used only when mounting to Behringer's proprietary RAL-1.
Manufacturer: Behringer
Behringer's RAL-0 can be used to mount clamps with RCN-0 rail nuts only. This rail is a DIN standard rail. (DIN 3015-1)
Manufacturer: Behringer
Behringer's proprietary RAL-1 can be used to mount both clamps with RCN-1 rail nuts or STW weld plates. This allows more flexibility of inventories and simplifies installation and field modifications.
Manufacturer: Behringer
The UCN nut is used to adapt Behringer's pipe clamps to standard strut channel. This allows for even greater flexibility and mounting possibilities.
Manufacturer: Behringer
The cover plate is the standard top fixture for securing the clamp with hexagon head bolts.
Manufacturer: Behringer
The safety plate is used in conjunction with the STB stacking bolts below. This ensures that the stacking bolts will remain locked in place when tightening the clamp module stacked above.
Manufacturer: Behringer
The hexagon head bolt is used when using clamps with cover plates or cover washers.
Manufacturer: Behringer
The stacking bolt is used when another clamp module will be stacked ont op of the bottom or existing module. The head of the stacking bolt has a female thread for the next bolt to engage with.
Manufacturer: Behringer
Cover washers can be used as an alternative to cover plates in some applications where there is little vibration, and low operating pressures.