Request for Quote
Request a Catalog
Download Literature
Subscribe to Product/Educational Updates
Call Us:1(973) 948-0226    Print/Download this pdf
You are here:  home > hangers & clamps > hygienic tube hangers/supports > accessories > stanchions > rod stand plate
Industrial Clamp
Drawing Downloads
Click here for more info:
3D & 2D Drawings/Models

Click here for more info:
Behringer's Product Specific Webinars

Interchange Elements
Click here for Behringer's Interchange Elements:

Rod Stand Plate
One piece CH Series Rod Stand Plate with rod cut to specified length. The rod is welded to the base plate, which can be supplied with or without anchor bolt-holes. Anchor bolts not supplied by Behringer.

The height is calculated from the top of the plate to centerline of tube or pipe. Please refer to "U" min column in catalog for minimum height of the required RH series product.

Base Plate Sizing: RSP1 & RSP2 - 0.25" to 2.00" OD tube & pipe sizes
RSP3 & RSP4 - 2.05" to 4.50" OD tube & pipe sizes
RSP5 & RSP6 - 5.08" to 6.00" OD tube & pipe sizes
Hardware: 304 stainless steel, 316 stainless steel
Finish: Mill = Fabricated steel and welds are a mill finish
Buff = Fabricated steel and welds are buffed to remove splatter
BLND = Fabricated steel is polished and welds are blended
Special finishes and painted stanchions are available, call Behringer